COMARK C48 Legionella Kit With FREE Traceable Calibration Certificate (PENETRATION + SURFACE PROBE)

Comark C48 High Quality Legionella Kit With Free Traceable Calibration Certificate (Penetration + Surface probe)

*Traceable Calibration Certificate dated on the day of order and showing results against specified points of +0°C,+50°C & +80°C 

Testing for Legionella with the Comark Legionella Testing Kit

Current law concerning Legionella water temperature testing, as defined in the revised Approved Code of Practice (ACOP) issued by the Government's Health and Safety Executive (HSE),states that it is the responsibility of all employers, who manage premises with hot/cold water systems and/or a wet cooling systems, to prevent Legionella contamination and to prevent or control its spread.

This kit from Comark is designed to help prevent the spread of the Legionnaires type of bacteria. Generally, Legionella bacteria start to multiply in water at temperatures between 20 to 45°C (with the spread increased by the presence of nutrients such as rust, algae, sludge and scale). To control this, water should typically be kept cold below 20°C while hot water should be stored above 60°C and distributed at 50°C.

You can use this kit to test the water in storage as well as test the surface of pipes and tanks in the water system.

If you have responsibility for management of water systems at your facility, a Comark Instruments Legionella Kit will make that job easier. The kit contains a C48 Thermometer, which is supplied with a Free UKAS Laboratory Certificate of Calibration. There are three robust probes to provide options for air,
penetration and surface of temperature measurement.

Housed in a robust case with built-in protective rubber boot it can be used in a wide range of applications. Use with any Comark Type K probe with a sub-miniature connector.

The C48C Type K Thermocouple Thermometer is reliable and accurate for temperature measurement in all food environments. Housed in a robust case with built-in protective rubber boot, designed for use with a wide range of Comark probes with sub-miniature connector. The features of this Type K Food Thermometer include a permanent clock and countdown timer within the display – with selectable alarms – to allow probe insertion times to be monitored.

The case of the C48C Type K Thermocouple Thermometer is rated to IP65/IP67 dust and waterproof standards and Comark also uses BioCote Antimicrobial Protection, the only antimicrobial solution to be awarded HACCP International Certification, to provide an important extra level of defence against cross-contamination. This product is also NSF Certified.

C48C Thermometer Specifications & Benefits

Comark C48 Legionella Food Thermometer Kit Consisting:

	The C48 Industrial Thermometer is a simple to use, food thermometer with Type K Thermocouple for reliable and accurate temperature measurement. It has an easy to use keypad and large LCD display.
	The Pro1 Probe is Type K Probe fitted with a 2-Pin Sub-Miniature connector, to provide a quick and easy connection to your device.
	The SK21M General Purpose Fast Response Probe is a Type K Thermocouple Surface Probe, fitted with a 1m curly cable.
	The AK28M Flexible Wire Air Probe is a Type K Thermocouple Air Probe, with a total length of 1m.
	The MC28 Blue Medium Size Case is a hard carrying case specifically designed to take one thermometer and a range of probes.
	Free Traceable Calibration Certificate at the standard points of 0°C, 70°C and 100°C.

Traceable Calibration Certificate

This unit is shipped with a Traceable Calibration Certificate dated on the day of order and showing results against specified points.

The calibration is carried out to National Standards using UKAS Accredited Laboratory Certificated Equipment. This gives the Certificate a traceability route right back to the national laboratory.

Our calibrations on this unit are done using a Julabo Calibration Bath and a UKAS Accredited Laboratory Calibrated Lab Facility Tempmaster Reference Thermometer.

NB Check with your inspector if unsure if a Traceable  Certificate meets your business requirements.